Files (7)

Clip_tester.stl

STL

29.0 KB

iPhone_13_with_case__holder.stl

STL

256.0 KB

Main_clip_remix.stl

STL

250.3 KB

nut_remix.stl

STL

625.8 KB

Pivot_v3.stl

STL

1.3 MB

Rod_v3.stl

STL

913.6 KB

Rondella_v2.stl

STL

230.8 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

7 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Clip_tester.stl	Clip	29.0 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in slicer for optimal printing
iPhone_13_with_case__holder.stl	Mount / bracket	256.0 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in slicer for optimal printing
Main_clip_remix.stl	Clip	250.3 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in slicer for optimal printing
nut_remix.stl	Printable file	625.8 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in slicer for optimal printing
Pivot_v3.stl	Printable file	1.3 MB STL	Slice file	Slice file	Slice file	Ensure proper orientation in slicer for optimal printing
Rod_v3.stl	Printable file	913.6 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in slicer for optimal printing
Rondella_v2.stl	Printable file	230.8 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in slicer for optimal printing

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Astra J iPhone 13 holder

0 downloads32 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I`ve remixed this model to fit iPhone 13 with silicone case. So this holder can fit 12.4mm thick and 153.3mm height phone. Added wings to the nut for easier tightening. Added honey comb holes on the back for ventilation and on the bottom to access volume control buttons. Improved hook/clip so the whole phone holder doestn`t pop out of its place in the car.