Audi_A4_Lower_Airbox_Post_v7.stl

STL

78.8 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Audi_A4_Lower_Airbox_Post_v7.stl	Primary model	78.8 KB STL	Slice file	Slice file	Slice file	Ensure a strong adhesion to the print bed to prevent warping.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Audi A4 B6 Lower Airbox Post

0 downloads51 views0 likes

Shared by

Verified

Description

Cap that snaps around posts(which break off) and plug into original mounting holes.

Published Jun 29, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by (rob0tuss1n) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Finding specific fitment/category matches first.