Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Audi_holddown.stl | Primary model | 118.3 KB STL | Slice file | Slice file | Slice file | Ensure a strong adhesion to the print bed to prevent part warping |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Audi quick release hold down screws
Shared by
3DPrintedCarPartDescription
I didn't really want to go to Audi for the parts, but I'd lost 2 out of three holddowns for the engine cover. So I measured up the old one, drew it up in Fusion 360, and printed two on my Tevo Tarantula.
Compatible Cars
Originally published on thingiverse.com by Eric Boeck (BoeckEH) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
Audi A4 B6 Heater hose quick connector PLUG
License: CC BY-SA
View & download STL files
Audi A4 B6 Lower Airbox Post
License: CC BY
View & download STL files
Radiator Plug (Top) for B8 Audi A4
License: All Rights Reserved
View STL source
AUDI A4 B6 bench lever
License: CC BY
View & download STL files
Audi B8 (A4, A5) MAF extension plug
Audi
License: CC BY
View & download STL files
BMW X5 E70 Center Console Blind Plate
BMW
License: CC BY
View & download STL files
