Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Audi A8 S8 D3 cup holder insert
Shared by
3DPrintedCarPartDescription
The cup holder insert for the D3 Audi chassis (A8 and S8) is terrible. The large size is too large and travel mugs are not secure, leading to spills due to the incredible lateral G-forces these fine steeds can muster. Furthermore, the spring loaded tension tabs break if you look at them wrong, making the whole situation even worse. I decided to make an insert that works better. This is what I got, made in TinkerCad. It is designed to hold a standard-size 12oz can on the left, and a Yeti/RTIC 20 or 30oz travel mug on the right. These fit perfectly. I have two versions, one with a closed bottom, print and use. The other has an open bottom, if you want to transfer the 58mm aluminum discs from the base of the factory inserts that came on the S8. If you have a need for a different size opening (larger or smaller), then let me know and I can whip up a custom size to share.
Compatible Cars
Originally published on thingiverse.com by Jonas Karlsson (jonaskarlsson) · License: CC BY-NC-SA
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
