Files (1)

cupholder_v2.STL

STL

224.8 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
cupholder_v2.STL	Mount / bracket	224.8 KB STL	Slice file	Slice file	Slice file	Ensure a snug fit in the center console for optimal performance

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Cup Holders

Audi B3 Cup Holder, 12oz

0 downloads40 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is an Audi B3 Cup Holder. Fit 12oz "soda pop" can, not tall slim 12oz cans. Cup holders in an early Audi is a no no, because driving..... but there were rare elusive OEM options that didn't require drilling holes in the center console for cheap flip out holders. Atlas a printable solution that fits snug in the the center console. Even under hard accelerations your 12oz can will stay in place (maybe not the contains). Made this back in 2014 to fit my '90 and '91 B3 Coupe Quattro. Will most likely fit 90's, 80's, 200's with a similar center consoles. Mine is made out of a Carbon/PLA. Feel free to adapt as needed.