← Back to Browse Parts
Audi Q2 Cup Holder for Center Console - image
Print guidance estimate
Estimated from part metadata
Print cost & setup estimate
Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.
0 model files
Recommended kit

Based on 25% main infill across listed model files

Material cost
$0.00

Filament only at roughly $24/kg PETG / ASA

Print time
—–—

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL fileRoleSource sizePETG / ASA 20%PETG / ASA 25%100% solidRecommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Cup Holders

Audi Q2 Cup Holder for Center Console

0 downloads46 views0 likes
3DPrintedCarPart logo
Verified

Description

With the original coin holder from Audi, the space in the center console tray is not optimally utilized. Smaller items are difficult to find in the tray while driving if the original coin holder is fitted. Without the coin holder, it is difficult to safely place a cup there. This cup holder divides the storage space into a part for a cup and a larger compartment for other things. In addition, there are two space-saving slots for coins. The insert can be rotated that the cup holder is either left or right. Of course, instead of a cup something else can be stored there. For example, a sunglasses case. The cup holder fits all model years of the Audi Q2. The model is designed so that it does not need supports. It can be printed as it is. ------------------------ Mit dem originalen Münzhalter von Audi wird der Platz in der Ablage der Mittelkonsole nicht optimal ausgenutzt. Kleinere Teile lassen sich während der Fahrt in der Ablage nur schwer finden, wenn der originale Münzhalter montiert ist. Und ohne den Münzhalter ist es schwierig, dort einen Becher sicher abzustellen. Dieser Becherhalter teilt den Ablageplatz in einen Teil für einen Becher und ein größeres Fach für andere Dinge. Zusätzlich sind zwei platzsparende Schlitze für Münzen vorhanden. Der Einsatz kann so gedreht werden, dass der Becherhalter wahlweise links oder rechts ist. Natürlich kann statt eines Bechers auch etwas anderes dort verstaut werden, zum Beispiel ein Sonnenbrillen-Etui. Der Becherhalter passt für alle Baujahre des Audi Q2. Das Modell ist so konzipiert, dass es ohne Stützen auskommt. Es kann so wie es ist gedruckt werden.

Compatible Cars

Published Jun 27, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by Frank Bernhard (FrankBer) · License: CC BY-NC

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…
Sign in to share fitment proof, installed photos, and material notes.
Comments (0)
Part lists
Save this part to named public or private collections. Public lists can be shown on this part page.