Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Audi/VW Rear Washer Cap Cover
Shared by
3DPrintedCarPartDescription
A simple rear washer cap cover I made for my 1999 Audi A3 8L. Should be suitable for MK4 VW Golf's and potentially other VAG group cars from around the same time. Potentially you may need to adjust the scale by a few % to fit depending on your settings.
Compatible Cars
Originally published on thingiverse.com by Lewis Smith (Layerz) · License: CC BY-NC
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
Audi B8 (A4, A5) MAF extension plug
Audi
License: CC BY
View & download STL files
VW-Audi Washer Fluid Reservoir Cap
Volkswagen, Audi
License: CC BY
View & download STL files
Oil Cap Socket for 74mm for VW, BMW vehicles
BMW
License: CC BY
View & download STL files
Volkswagen MK4 Battery Hold Down for Golf / Jetta
License: CC BY
View & download STL files
VW Mk4 Spare Tire Holder
License: CC BY
View & download STL files
BMW X5 E70 Center Console Blind Plate
BMW
License: CC BY
View & download STL files
