Austin mini steering column lower cover - image

Files (2)

cloche_direction_mini.STL

STL

663.8 KB

cloche_direction_mini_coupelle.STL

STL

326.4 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
cloche_direction_mini.STL	Printable file	663.8 KB STL	Slice file	Slice file	Slice file	Ensure a stable printing surface to prevent warping
cloche_direction_mini_coupelle.STL	Printable file	326.4 KB STL	Slice file	Slice file	Slice file	Ensure a stable printing surface to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Austin mini steering column lower cover

0 downloads27 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

These two parts fit the lower end of the Austin Mini 's steering column. I designed it so I eliminate axial shake, and hold the carpet in place. The bell is TPU and the flat part is ABS.