back camera upholding for great C4 PICASSO Citroen - image

Files (1)

Support_Camera_Voiture1.1.stl

STL

88.6 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Support_Camera_Voiture1.1.stl	Primary model	88.6 KB STL	Slice file	Slice file	Slice file	Ensure the print is properly secured to the print bed to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

back camera upholding for great C4 PICASSO Citroen

0 downloads37 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Use this support only for a Inside place of the back camera on a great C4 PICASSO Citroen 7 Places. Fix it with stop lighting screw, Under the plastic cover. Print in 60% min.