Files (1)

Baofeng_mic_button_adapter.stl

STL

181.4 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG 20%	PETG 25%	100% solid	Recommendation
Baofeng_mic_button_adapter.stl	Primary model	181.4 KB STL	Slice file	Slice file	Slice file	Print with the adapter upside down as recommended by the designer

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Baofeng UV5R mic button adapter

0 downloads48 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I had a mic mount in my jeep but wanted the added range of using a UV5r as a ham instead of the cheezy cb radio (I'm licensed). I know an interior vehicle antenna isn't great but it works better than the CB did with its whip antenna. Print it upside down. This replaces the clip on a Uv5R and allows it to sit in the pictured mic clip without wiggling. I use a Baofeng battery eliminator which plugs in to the cigarette lighter. My mount can be found here: https://www.amazon.com/gp/product/B07ZYJKR49/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1 I have a 2013 jeep JKU that is in the pictures. Good luck, stay legal with your radios, There are federal goons and Hams that will find and report illegal use which can be a big fine at the very least.