Files (1)

Beetle_Mic_Mount.STL

STL

5.8 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Beetle_Mic_Mount.STL	Mount / bracket	5.8 MB STL	Slice file	Slice file	Slice file	Ensure the model is oriented to minimize supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Center Console

Blue Tooth Mic Mount VW Beetle

0 downloads47 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is used to hold a small blue tooth microphone in a 2005 VW beetle "New Beetle". It replaces the un-nessecary flower holder (what were they thinking?). This microphone is one that comes with a Pioneer car stereo MVH-290BT. I pulled the trim piece off of the dash (very easy to do) and drilled a hole into the center console for the mic to come through, this way the wire is completely hidded once the dash trim piece is replaced. There is a wire slot in the 3D printed mount.