Tray for Volkswagen ID.3 Middle Console VW ID3 - image

Files (2)

ID3Tray_-_ID3-snap.stl

STL

3.0 KB

ID3Tray_-_ID3-Tray.stl

STL

6.7 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	ASA / PETG 20%	ASA / PETG 25%	100% solid	Recommendation
ID3Tray_-_ID3-snap.stl	Accessory piece	3.0 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.
ID3Tray_-_ID3-Tray.stl	Printable file	6.7 MB STL	Slice file	Slice file	Slice file	Ensure proper bed adhesion to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Center Console

Tray for Volkswagen ID.3 Middle Console VW ID3

0 downloads51 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Created a Remix of this tray: https://www.thingiverse.com/thing:4895497 as i could not print the original in ASA without warping. You will need two of the "snaps" - they slide in the tray with a dovetail, so no glue needed.