Files (1)

ID4_Glasses_Holder_2_v9.stl

STL

322.5 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
ID4_Glasses_Holder_2_v9.stl	Mount / bracket	322.5 KB STL	Slice file	Slice file	Slice file	Ensure a strong adhesion to the print bed to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Center Console

Volkswagen ID.4 Glasses Holder

0 downloads51 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

A glasses holder that slots into the centre console of a Volkswagen ID4. Inspired by a design that's commercially available on Etsy, but this is all my own work. Dimensions are 160mm wide, 70mm deep, and 50mm tall. The tabs that fit into the card slots in the VW centre console are 14mm.