Middle Console Divider for Volkswagen ID.3 - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Center Console

Middle Console Divider for Volkswagen ID.3

0 downloads32 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

An additional divider for the middle console of the electric vehicle Volkswagen ID.3. You should print it top down as provided. DO NOT PRINT THIS WITH PLA!!! Temperatures in cars can get very high and might melt PLA-Prints!!! Check out my other designs for the ID.3: Tray for the Middle Console: https://www.thingiverse.com/thing:4895497 Cup Holder Inlay Template: https://www.thingiverse.com/thing:4895532