Files (1)

Hazard_Triangle_Holder.stl

STL

65.8 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Hazard_Triangle_Holder.stl	Mount / bracket	65.8 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer for optimal support generation

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Trunk/Tailgate

BMW Hazard Triangle Bracket

0 downloads34 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

BMW recently changed the price of their hazard triangle brackets to ~50€ which is far too expensive for a piece of plastic, so i designed some myself. You need to print the file 2 times. To install it, simply unscrew the 2 large screws on the trunk lid panel and use these screws to screw on the brackets. This is still a prototype, so feel free to send me any feedback you might have. Disclaimer: These brackets work by gripping the triangle with those flexible arms. Therefore, I can not guarantee that the triangle will stay in place during a crash. Due to the violent nature of crashes, the hazard triangle can become a dangerous projectile, especially with the seats folded down. You are responsible for properly securing your trunk load in the car, including the hazard triangle.