BMW M60/M62 to N62 Big Bore Throttle Body Adapter - image

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

0 model files

Recommended kit

—

Based on 10% main infill across listed model files

Material cost

$0.00

Filament only at roughly $24/kg PETG / ASA

Print time

—–—

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 10%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

BMW M60/M62 to N62 Big Bore Throttle Body Adapter

0 downloads37 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

This is an adapter to put the larger N62 throttle body on your BMW M60 or M62. The stock adapter bolts on but the bore is too small, negating any benefit from the larger TB. I modelled and printed the threads on this, then heated the bolts up with a lighter before I screwed them in. Hopefully it holds up. If not, I'll have to do a revision with either thru-holes or threaded inserts. Printed in PETG with 3 outlines and 50% fill.