Files (1)

S52_Valve_Cover_Plug.stl

STL

41.1 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
S52_Valve_Cover_Plug.stl	Cover / cap	41.1 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

BMW S52 Valve Cover Cap

0 downloads59 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Not really a remix since this is the cap that goes on the valve cover. The smaller cap from the original post fits on the intake manifold cover, at least on my car. I'm no expert on E36s. But this motivated me to make a cap for my engine. Printed in ABS and painted with Rust-oleum Bright Coat Metallic Finish.

Compatible Cars

BMW E36

Published Jun 29, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by Hugh Brian (quasibrain) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.