Files (1)
Based on 40% main infill across listed model files
Filament only at roughly $24/kg TPU
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | TPU 20% | TPU 40% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Body_Trim_Clip_Final.stl | Clip | 1.4 MB STL | 37g $0.89 | 50g $1.20 | 88g $2.12 | Reverse the insert pin when printing to make the rounded portion up |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
BMW Trim Clip for Vintage 2002
Shared by
Michael ChenDescription
Side Body Trim Retainer Clip for BMW 2002. The commercially available clips were unacceptable because they were improperly made and would not stay in place. This clip works well on my friend's 1973 BMW 2002 TTI. It holds the side trim on the doors and fenders. USE TPU. I tried ABS, but it was not durable enough and a couple of them broke during install. The TPU ones were indestructible. This is the final version of several iterations to get the fit just right. Reverse the insert pin when printing to make the rounded portion up. It will not require any supports to print.
Print Settings
Compatible Cars
Originally published on thingiverse.com · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
