Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | ABS / ASA 20% | ABS / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Tiguan_to_brodit.stl | Primary model | 136.1 KB STL | Slice file | Slice file | Slice file | Ensure the 'card' part is oriented to minimize warping and maximize strength |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Brodit card slot mount (Tiguan)
Shared by
3DPrintedCarPartDescription
A quick design allowing the use of a brodit mount utilising the credit card slots above the radio in a VW Tiguan. The 'card' part is as thick as i could make it for strength with it still fitting in the slot. Being in the UK this fits on my RHD Tiguan. I'm not sure of the arrangement on an LHD vehicle, but I would assume it would work in any car with similar card slots. The mount holes are such that the thread of the bolt should bite into the holes (I used M4x8). If you wish you could use longer bolts with nuts on the back, but beware of scratching bits of the interior behind if the bolts protrude and rest against the facia. I would recommend printing in ABS as PLA may soften in a hot car.
Compatible Cars
Originally published on thingiverse.com by Dave Boyce (Dave_B) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
