Files (2)

iPhone6-card-holder.STL

STL

936.7 KB

iPhone6-card-holder_-_rotated.stl

STL

165.3 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
iPhone6-card-holder.STL	Mount / bracket	936.7 KB STL	Slice file	Slice file	Slice file	Ensure the model is oriented to minimize supports
iPhone6-card-holder_-_rotated.stl	Mount / bracket	165.3 KB STL	Slice file	Slice file	Slice file	Ensure the model is oriented to minimize supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

iPhone 6 holder on VW Tiguan

0 downloads35 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is the phone holder using the card slots on VW Tiguan 2014, similar design on other cars may also work. I already using this for a while and works good. Please let me know if it also working good on yours, and which car model. Enjoy! ===UPDATE 2018/03/21=== Here is the smaller holder for iPhone 6 / 7 plus: https://www.thingiverse.com/thing:781934