Files (4)
Based on 25% main infill for the largest likely-needed model file
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Left_Visor_Mount.STEP | Choose left variant | 464.3 KB STEP | 21g $0.49 | 22g $0.54 | 49g $1.18 | Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing. |
| Left_Visor_Mount.STL | Choose left variant | 424.2 KB STL | 20g $0.48 | 22g $0.52 | 47g $1.14 | Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing. |
| Right_Visor_Mount.STEP | Choose right variant | 483.6 KB STEP | 21g $0.50 | 23g $0.55 | 50g $1.20 | Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing. |
| Right_Visor_Mount.STL | Choose right variant | 426.9 KB STL | 20g $0.48 | 22g $0.52 | 48g $1.14 | Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing. |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
BRZ/FT86 Visor Mounts
Shared by
3DPrintedCarPartDescription
Driver Side (Left) and Passenger Side (Right) sun visor mounts for the Subaru BRZ/Scion FRS/Toyota FT86. It was designed off of the 2013 BRZ and should fit other years and models. Subaru and Toyota do not sell the mount itself but only sell the visor as a complete assembly for too much money.
Compatible Cars
Originally published on thingiverse.com by Kirt McKenna (whiskeyApproach) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
