Files (3)

Deck1.stl

STL

278.1 KB

Deck2.stl

STL

5.1 KB

Deck3.stl

STL

5.1 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

3 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Deck1.stl	Printable file	278.1 KB STL	Slice file	Slice file	Slice file	Ensure proper adhesion to the print bed to avoid warping
Deck2.stl	Accessory piece	5.1 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.
Deck3.stl	Accessory piece	5.1 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

GT86 Lower Deck Cover

0 downloads33 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

86 or BRZ (gt86) has a little storage space under the climate control. A media receiver (shorter than normal car audio) can be installed to that space using this cover. I made hook parts separately to give it enough strength. Bond using Loctite 401.