Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| BRZ__FT86_USB_Port.stl | Primary model | 31.3 KB STL | Slice file | Slice file | Slice file | Ensure a brim or raft is used for better adhesion |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
USB Port Plug for BRZ / FRS / GT86
Shared by
3DPrintedCarPartDescription
This is just a plug that goes in place of the factory USB position in the Subaru BRZ. Tested on a 2017 BRZ. CAD file attached so that you can adjust the dimensions to match the USB port that you have. I eyeballed the corner radii so they're not perfect but the overall fit of the part is good enough for me. Measurements: Outer Dimension: 33mm x 23mm, 4mm radius on corners. Lip Depth: 6mm (this could be thickened) Port Dimension: 18mm x 11mm x 9mm (depth). Port Walls (3mm thick): Inner Edge ^^, Outer Edge - 24mm x 17mm.
Compatible Cars
Originally published on thingiverse.com by Andrew Niziolek (ajaxburger) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
