BRZ Limited Instrument Cluster Bezel - image

Files (1)

181_final.stl

STL

5.7 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
181_final.stl	Primary model	5.7 MB STL	Slice file	Slice file	Slice file	Ensure a stable printing surface to avoid warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Dashboard

BRZ Limited Instrument Cluster Bezel

0 downloads55 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Looking to design a gauge pod that fits on the right side of the instrument cluster. Took a 3d scan using a Kinect I had lying around. The scan turned out less than ideal. Imported into solidworks and solidworks would not turn this.stl into a useable surface I could use for modeling purposes.