Bumper hatch for jeep hitch renegade_ Trappe de parechoc pour attelage - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Rear Bumper

Bumper hatch for jeep hitch renegade_ Trappe de parechoc pour attelage

0 downloads38 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

J'ai créé et imprimé une trappe de cache et loquets en impression 3D (çà coute 150€ en concession!!) Dans cette version, il y un cadre et des loquets, on utilise la partie découpée du parechoc pour la partie centrale Les 2 parties du loquet sont assemblées en faisant fondre au fer à souder. Il y a des clips sur le tour (mais il vaut mieux ajouter de la colle) Le cadre fait 2mm: ajouter 1 mm d'espace de part et d'autre. Détails du montage d'attelage ici http://chezcyril.over-blog.com/2019/09/monter-un-attelage-sur-jeep-renegade.html I created and printed this in 3D (it costs € 150 in concession!!) In this version, there is a frame and latches, we use the cut off part of the bumper for the central part The two parts of the latch are assembled by melting with soldering iron. There are clips on the inside (but it is better to add glue) The frame is 2mm: add 1 mm of space on both sides.