Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| camera_housing_35.stl | Primary model | 2.1 MB STL | Slice file | Slice file | Slice file | Ensure the housing is oriented to minimize supports |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Jeep Wrangler JK reversing camera housing
Shared by
3DPrintedCarPartDescription
I have the ARB license plate relocation bracket and wanted to add an Alpine reversing camera to the bracket. This works perfectly. I actually mounted the bottom half of the bracket to the number plate using double sided mounting tape. Zip ties through the holes up the centre hold the camera in place without any further fixing. The camera is angled at 30 degrees and this gives a good view. (35 degrees may have been a little better with hindsight.).
Compatible Cars
Originally published on thingiverse.com by Lawrence Maynard (limaynard) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
