Cabin air filter holder for Nissan 200SX S13 - image

Files (4)

Seal.stl

STL

274.4 KB

Filter_cover.stl

STL

1.4 MB

Heater_insert.stl

STL

477.5 KB

Filter_holder.stl

STL

689.0 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

4 model files

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Seal.stl	Printable file	274.4 KB STL	8g $0.20	9g $0.22	20g $0.47	Ensure proper orientation in the slicer for optimal printing
Filter_cover.stl	Cover / cap	1.4 MB STL	16g $0.38	17g $0.41	38g $0.91	Use PETG / ASA; check sealing faces and verify in slicer.
Heater_insert.stl	Printable file	477.5 KB STL	10g $0.24	11g $0.26	24g $0.58	Ensure proper orientation in the slicer for optimal printing
Filter_holder.stl	Mount / bracket	689.0 KB STL	12g $0.28	13g $0.31	28g $0.67	Ensure proper orientation in the slicer for optimal printing

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Accessories

Cabin air filter holder for Nissan 200SX S13

0 downloads185 views0 likes

Shared by

Michael Chen

Verified

Description

I am happy to share my cabin air filter holder project for Nissan S13 (LHD). This model doesn't have OEM filter. This design is relatively easy to install, you need to remove only the windshield glass cowl. There is not so much space but its enough to install insert and holder part separately. The parts are connected with neodymium magnets. To remove easily please add some keyring to the filter holder part, there is a little hook for it. 4x heat-set threaded inserts M3 1x filter 9678792080 (check description) 1x foam tape around 50cm length and 1-2mm thick.

Print Settings

Time: 2h

Filament: 50g

Supports: Not needed

Compatible Cars

Nissan (all models)

Published Feb 18, 2026Updated Jul 15, 2026

Originally published on thingiverse.com · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.