Files (2)

Clip_small.stl

STL

47.0 KB

Clip_big.stl

STL

43.4 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

2 model files

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Clip_small.stl	Clip	47.0 KB STL	23g $0.56	25g $0.61	55g $1.33	Ensure proper adhesion to the print bed to avoid warping
Clip_big.stl	Clip	43.4 KB STL	23g $0.55	25g $0.59	54g $1.30	Ensure proper adhesion to the print bed to avoid warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Cable Clip organizer

0 downloads144 views0 likes

Shared by

Michael Chen

Verified

Description

Simple cable organizer clips for all kinds of cables Very easy to print, only five minutes per piece and 3 grams of filament needed Get all your cables organized with these little clips.