Files (1)
Based on 20% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 20% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Cup_Holder_Divider.stl | Mount / bracket | 105.7 KB STL | 50g $1.20 | 50g $1.20 | 119g $2.86 | Use a brim or raft for better adhesion |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Car Cup Holder Divider with Smart Phone Slot
Shared by
Michael ChenDescription
If you want to put the cup holders in your car to more efficient use (as you seldom have coffee in your car) this is worth printing. This 'Cup Holder Divider' just sits in a standard size cup holder (made to 64mm to be slightly loose and fit almost any cup holder) to divide it into three compartments. The centre compartments intended to take a Smart Phone (almost all should fit). As a suggestion, place a piece of anti-slip rubber padding underneath to hold it in place without any potential for rattling or rotating through vibration. On a Replicator 2 this prints well with raft, 3 shells and 20% infill..
Print Settings
Originally published on thingiverse.com · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
