Car Head Rest Hook for Bags, Bottles, trash bag, purse, .... - image

Files (1)

Bag_Hook.stl

STL

4.7 MB

Print guidance estimate

Uses saved filament metadata

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Bag_Hook.stl	Primary model	4.7 MB STL	46g $1.10	50g $1.20	110g $2.63	Print with the flat part on the build surface for maximum strength

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Car Head Rest Hook for Bags, Bottles, trash bag, purse, ....

0 downloads218 views0 likes

Shared by

Michael Chen

Verified

Description

This was designed to be easy to print, strong enough to hold heavy objects, and most importantly avoid damaging the leather seat. It was designed around a 2018 Subaru Outback but should fit and car with a removable headrest. Let me know if you have a need for a longer model. Print on edge with the flat part on your build surface. This orients the part for maximum strength, do not use support. It is engineered to not use support.