Files (7)

18mm_Bracket.stl

STL

147.2 KB

Bolt.stl

STL

828.7 KB

15mm_Bracket.stl

STL

147.3 KB

15mm_Spacer.stl

STL

111.0 KB

18mm_Spacer.stl

STL

136.0 KB

Centre.stl

STL

738.2 KB

Hook.stl

STL

607.6 KB

Print guidance estimate

Uses saved filament metadata

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

7 model files

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
18mm_Bracket.stl	Mount / bracket	147.2 KB STL	Slice file	Slice file	Slice file	Ensure correct orientation for optimal strength and minimal supports
Bolt.stl	Printable file	828.7 KB STL	Slice file	Slice file	Slice file	Ensure correct orientation for optimal strength and minimal supports
15mm_Bracket.stl	Mount / bracket	147.3 KB STL	Slice file	Slice file	Slice file	Ensure correct orientation for optimal strength and minimal supports
15mm_Spacer.stl	Printable file	111.0 KB STL	Slice file	Slice file	Slice file	Ensure correct orientation for optimal strength and minimal supports
18mm_Spacer.stl	Printable file	136.0 KB STL	Slice file	Slice file	Slice file	Ensure correct orientation for optimal strength and minimal supports
Centre.stl	Printable file	738.2 KB STL	Slice file	Slice file	Slice file	Ensure correct orientation for optimal strength and minimal supports
Hook.stl	Printable file	607.6 KB STL	Slice file	Slice file	Slice file	Ensure correct orientation for optimal strength and minimal supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Car Headrest Bag Hooks

0 downloads157 views0 likes

Shared by

Michael Chen

Verified

Description

The Car Headrest Bag Hooks design is similar to some commercially available... but unlike other designs this is made in a way that this cannot be accidentally detached / unhooked from the heat rest posts due to the way it assembles. Headrest Bag Hooks are a great solution for your own use but will also be appreciated by many people as a practical gift for everyday use. And, they look great printed in any color or even multiple colors. Before starting you will need to measure your cars headrest seat posts to decide which Bracket and Spacer to download and print. Most cars will use the (up to) 15mm seat post version but an 18mm alternative set is provided. Assembly and fitting is easy, as follows: (1) Raise the headrest in your car so the U shaped Bracket can be pushed onto one of your headrest posts.