Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Car phone holder (for Opel)
Shared by
3DPrintedCarPartDescription
Phone holder / phone mount module for an Opel. i built it (and tested it) for an Opel Astra H. The joint is rotatable to about 15° in all directions. The range of the lateral brackets is from 63 to 80 mm. To connect all parts you need seven (7) additional M3*5mm screws and one (1) 4*20 mm wooden screws (Sorry I used the screws i had left from my last project. You can probably use another M4*15mm screw). I didn't design a thread for those, you might need some force to add the screws. The 3 Screws on the movable front part shouldn't be to tight. You should be able to move the parts easily.
Compatible Cars
Originally published on thingiverse.com by Matthias Hinsken (mhinsken) · License: CC BY-NC-SA
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
