Car phone mount - onshape files - Xiaomi mi 9 - image

Files (2)

BuckleSnapper.stl

STL

1.5 MB

PhoneClip.stl

STL

236.5 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

2 model files

Recommended kit

54g

Based on 25% main infill across listed model files

Material cost

$1.30

Filament only at roughly $24/kg PETG / ASA

Print time

1.5h–2.6h

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
BuckleSnapper.stl	Printable file	1.5 MB STL	34g $0.81	37g $0.88	80g $1.92	Ensure proper adhesion to prevent part warping
PhoneClip.stl	Clip	236.5 KB STL	16g $0.39	18g $0.42	38g $0.92	Ensure proper adhesion to prevent part warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Car phone mount - onshape files - Xiaomi mi 9

0 downloads40 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Car phone mount designed for a xiaomi mi 9 lite with its stock phone case. Based on a video of Thomas Sanladerer I only changed the screw holes sizes and the phone clip dimensions from Thomas design. On my Onshape Files I have a branch to test the phone clip size easily. Note: Once you have figured out the phone clip size on the test part, you'll have to make the final clip a bit bigger (0.25mm worked for me).