Files (1)

Sunglasses_Holder_v3.stl

STL

71.0 KB

Print guidance estimate

Uses saved filament metadata

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Sunglasses_Holder_v3.stl	Mount / bracket	71.0 KB STL	46g $1.10	50g $1.20	110g $2.63	Ensure the print bed is level and clean for optimal adhesion

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Car Sun Visor Sunglasses Holder

0 downloads148 views0 likes

Shared by

Michael Chen

Verified

Description

This is a Remix of Sunglasses Car Sun Visor Clip by trevorlong. Basically, the differences are: 1- I added some grooves for the sunglasses to sit on for more stability and so I can use it for more than 1 sunglasses. 2- I made it a bit thinner because my sunglasses were a bit too small for the original design. Keep in mind that the sunglasses I used were all thin frames, I didn't try any sunglasses with thicker frames.