Ethernet_Plug_Bracket_2.stl

STL

48.5 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Ethernet_Plug_Bracket_2.stl	Mount / bracket	48.5 KB STL	Slice file	Slice file	Slice file	Ensure a stable printing surface to avoid warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Cat-5 Weatherproof bracket adapter for GMRS radio - Jeep Wrangler JL

0 downloads25 views0 likes

Shared by

Verified

Description

Created a bracket to mount my cat-5 port for a dual connector for my Midland MXT-575 GMRS radio in my Jeep Wrangler. I created a splitter at the dash so you can connect the handset for use while driving, and then you can move the handset to the rear for base camp while using the rear of the vehicle (cooking/tailgating,etc). Adapter to use with bracket: https://smile.amazon.com/gp/product/B08H8JM451/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1 Bracket was designed to zip tie to the bottom of these, however you can adapt this design for where ever you want to mount it: https://smile.amazon.com/gp/product/B07M6RWTHY/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1