center handbrake console nissan micra k11 - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Center Console

center handbrake console nissan micra k11

0 downloads56 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

This is a spool holder that lets you keep the door on your FlashForge Adventurer 3 without making any modifications to the machine for printing external filament. All of the other designs are hours and hours, tons of wasted plastic and you have to keep the door off. Prints in 39 minutes. Super minimal design.... did I mention you can keep your door on? I would like to add two little tiny filament guides for running the filament through the inside that can handle just raw filament or to hold a PTFE tube permanently. So little time! I hope you guys enjoy this. I printed this with PLA Carbon Fiber and included the gcode (.gx) and flashforge project (.fpp).