Files (1)
Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| gauge_cluster.stl | Primary model | 271.4 KB STL | 17g $0.41 | 18g $0.44 | 40g $0.97 | Ensure proper orientation in slicer for optimal support generation |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Nissan 350Z center console gauge panel - replaces cubby storage
Shared by
3DPrintedCarPartDescription
This is a replacement panel for the 350Z center console. It allows additional 3 gauges as well as relocation of the hazzard switch and the cigarette lighter from the lower dash. I've created it for my track car conversion, since most of the lower dash was being removed. Accepts up to 60mm gauges. It's a "good enough" design, will need some shims for the hazzard switch mount and drilling of the mounting tabs for screws.
Compatible Cars
Originally published on thingiverse.com by Tom Kl (DrHoon) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
