Coin Tray for Nissan Leaf 2015-2014-2013 - image

Files (3)

Nissan_Leaf_2015_Coin-1_divider.stl

STL

902.3 KB

Nissan_Leaf_2015_Coin-No_divider.stl

STL

651.2 KB

Nissan_Leaf_2015_Coin_Tray-V5.stl

STL

1.1 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

3 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Nissan_Leaf_2015_Coin-1_divider.stl	Printable file	902.3 KB STL	Slice file	Slice file	Slice file	Ensure a brim or raft is used for better adhesion if necessary
Nissan_Leaf_2015_Coin-No_divider.stl	Printable file	651.2 KB STL	Slice file	Slice file	Slice file	Ensure a brim or raft is used for better adhesion if necessary
Nissan_Leaf_2015_Coin_Tray-V5.stl	Printable file	1.1 MB STL	Slice file	Slice file	Slice file	Ensure a brim or raft is used for better adhesion if necessary

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Center Console

Coin Tray for Nissan Leaf 2015-2014-2013

0 downloads80 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a coin tray for the Nissan Leaf S 2015. I would assume that it fits all Nissan leaf from 2011-2017, but maybe they have various versions of the center console, I really don't know. Since there is nowhere to put any coins except loosely at the bottom of the center console, I remixed my own tray I did for the Mazda 6 to fit my newly acquired Leaf (amazing car if you don't think of its look!). Took me 5 tries before I got all the angles just right... **April 23 2017: On request, I added a tray without the dividers in, if you want to put something bigger than coins. I also made one with just 1 divider, for a mix of big and small stuff:).