Files (1)

corvette_logo.stl

STL

5.0 MB

Print guidance estimate

Uses saved filament metadata

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
corvette_logo.stl	Primary model	5.0 MB STL	46g $1.10	50g $1.20	110g $2.63	Ensure the model is oriented to minimize supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Exterior

chevrolet corvette logo

0 downloads183 views0 likes

Shared by

Michael Chen

Verified

Description

i needed a proper chevrolet corvette logo, a variation with horizontal flags (this one https://www.youtube.com/watch?v=MFzE50POb6c), but didn't manage to find any with proper quality, so i made one myself. you can tweak bevel and subdivision modifiers. also, if you are not satisfied with topology, there are simple angled and rounded shapes as well as 'corvette' word. i hope it will be useful to you. не смог найти логотип корвета с горизонтальными флагами (как тут https://www.youtube.com/watch?v=MFzE50POb6c)