Files (2)
Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Chevy_Tahoe_950_2.stl | Printable file | 1.7 MB STL | Slice file | Slice file | Slice file | Ensure proper orientation in the slicer to minimize supports |
| Chevy_Tahoe_Tire_Normal_Print_4x.stl | Printable file | 11.1 MB STL | Slice file | Slice file | Slice file | Ensure proper orientation in the slicer to minimize supports |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Chevrolet Tahoe
Shared by
Michael ChenDescription
Here is a Chevy Tahoe mode that can be 3d printed. I put the tire here and it needs to be printed 4 times. For the holes, you can put wire through them and the tires in order to make the tires spin, or glue them straight on. When printed at 950% size on Cura, it will give you a 1/75 model. I actually got this model from Sketchfab, where I edited it and solidified in on Blender in order to make it printable. The tires, however, were much more tricky when doing it it in my approach. I might post another one up that is a police version of the model. The differences will be the tire rims, the new light bar, and the bullguard bumper.
Print Settings
Compatible Cars
Originally published on thingiverse.com · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
