Chrysler LeBaron Top Latch Grommet - image

Files (1)

LeBaron_Top_Latch_Grommet.stl

STL

120.1 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 35%	100% solid	Recommendation
LeBaron_Top_Latch_Grommet.stl	Primary model	120.1 KB STL	Slice file	Slice file	Slice file	Verify orientation and support needs in your slicer before printing

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Chrysler LeBaron Top Latch Grommet

0 downloads39 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

The convertible top alignment pin grommet or guide for a Chrysler LeBaron convertible, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995. May fit other years and other models, possibly the Sebring. P/N 4410254 I've seen many of these worn through. No sense in paying exorbitant prices for an obsolete part when you can just print it. I was able to print with no supports. They snap into place perfectly. When printed in black, they look right at home when installed.