J1772 Pacifica Hybrid inlet plug - image

Files (1)

J1772_Pacifica_Hybrid_inlet_plug.stl

STL

1.1 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	ASA / PETG 20%	ASA / PETG 90%	100% solid	Recommendation
J1772_Pacifica_Hybrid_inlet_plug.stl	Primary model	1.1 MB STL	Slice file	Slice file	Slice file	Avoid using PLA due to potential melting and fire hazard

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

J1772 Pacifica Hybrid inlet plug

0 downloads101 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I made this to replace a broken J1772 Chrysler Pacifica Hybrid inlet plug connector. The fit is proper, but it hasn't been fully tested in regards to safety and durability. I made it to be a temporary fix, so use at your own risk. Actually, I don't recommend for wires to be installed in this plug, if for some reason the PLA melts, it could cause a short and fire.