Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| BMW_cig_bezel.stl | Primary model | 27.5 KB STL | Slice file | Slice file | Slice file | Ensure a snug fit by adjusting the model's scale if necessary |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
cigarette lighter sleeve for BMW vehicle
Shared by
3DPrintedCarPartDescription
The cigarette lighter console housing broke creating a perfect hole that the lighter slips through. This was my solution and first contribution to thingiverse. Feel free to remix change anything you want as my design works but is still rather primitive. It fits perfectly in the hole and has a slight cone shape in the cylinder to create pressure. once i printed this, I then cut stress relief lines along the cylinder so it wouldn't snap. There are two rectangular holes in the lighter itself, I heated the cylinder slightly and pressed it into thos rectangular holes so the lighter wont slip around. I printed this part in PLA with normal settings. Hope it helps someone else.
Compatible Cars
Originally published on thingiverse.com by richard frost (3DRicardo) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
