Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Citroen C8 - Peugeot 807 Handbrake Cover
Shared by
3DPrintedCarPartDescription
This part will fit the Handbrake on a Citroen C8 Right Hand drive for left hand drive Vehicles just mirror the part in the slicer if any one is having trouble with that then please let me know and i'll flip it for you. The part does have a slight access at the back but it does not effect use and still works as intended. I will have to admit i have not looked at the back to see if it can be taken in at all so I may make an edit at some point to close the gap. The reason why reason why I designed this part was due to poor communication with breakers on ebay and being unable to find this part online and in my research i found that Peugeot 807 parts are the same as the Citroen C8, I also found there is a Seat (as in the car make) out there that also shares some of the same parts as well but was still unable to find the part for a right hand drive so I made some measurements made a rough draft and went from there.
Compatible Cars
Originally published on thingiverse.com by (blitza700) · License: CC BY-NC-SA
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
