Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	ABS / ASA 20%	ABS / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Door Handles

Civic 7th gen Door handle

0 downloads60 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

This is a door handle replacement/upgrade for the 7th gen Honda Civic, its supposed to be plug and play, print from ABS, because PLA cant last under the temperature. it takes a little bit of effort pushing the spring back inside. and you may need to enlarge a little the hole which holds the door wire(only from the inner side), I did it with my key. both models were tested on front doors, its supposed to be okay on the rear ones too though.