Honda Civic VI (1996) - latch of internal handle - image

Files (1)

Honda_Civic_VI_zatrzask_klamki_v2.stl

STL

169.5 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

16g

Based on 25% main infill across listed model files

Material cost

$0.38

Filament only at roughly $24/kg PETG / ASA

Print time

27m–45m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Honda_Civic_VI_zatrzask_klamki_v2.stl	Primary model	169.5 KB STL	14g $0.35	16g $0.38	34g $0.83	Ensure proper orientation in the slicer for optimal printing

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Door Handles

Honda Civic VI (1996) - latch of internal handle

0 downloads58 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a design of the latch for internal handle for Honda Civic VI generation (1996). During disassembly 3 latches broke that's why I had to print replacements and glue them to the handle housing (using acetone, 2 compound resin glue and solder iron for joining external breaking lines). tags: Honda Civic VI (1996) - latch of internal handle snap mount hand grip.