Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 40% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Clip for cover wheel housing for BMW Z4 (E85 +E86)
Shared by
3DPrintedCarPartDescription
This is the clip to close the revision flap in the wheel arch. It is not sold separately at BMW only with the whole cover It is to close the numbers 4 or 5. ###Printing Print out the two parts without support and stick together. ###Choose ur fillament I printed it with PLA and it works. However, after a year's use, it deformed a bit. I assume that it comes through the hot summer days, engine heat and possibly the heat from the xenon lamps. ABS would probably be a little better. However, mine still hold after two years.
Compatible Cars
Originally published on thingiverse.com by Safin 3D (safin85) · License: CC BY-NC
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
