Files (2)
Choose the needed variant and slice it; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| p2015_bracket.stl | Mount / bracket | 63.8 KB STL | Slice file | Slice file | Slice file | Ensure proper orientation in the slicer for optimal printing and minimal supports |
| p2015_bracket_no_hole_drill.stl | Mount / bracket | 67.9 KB STL | Slice file | Slice file | Slice file | Ensure proper orientation in the slicer for optimal printing and minimal supports |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Common Rail TDI VW bracket to eliminate P2015 Trouble Code: Intake Manifold Runner Position Sensor
Shared by
3DPrintedCarPartDescription
This is to limit the intake sensor on my 2012 VW Jetta TDI to get rid of the p2015 check engine light. I measured and modeled this from a part I saw on my friends VW. He had bought this part off amazon. I changed a few things to make it easier and stronger to 3d print. This is for a car with the aluminum intake. This works for a lot of cars that have the p2015 code. Don't spend $990 from the dealer to fix this!!!! Print from PLA and anneal it, or print from PC to withstand the high engine bay temps. You will need to drill out the hole once it's done printing/annealing to fit the long bolt. I added another file with the hole the correct size if you don't want to drill it out.
Compatible Cars
Originally published on thingiverse.com by matt huenink (scrat82) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
