Coolant Cap Wrench for Ford, Lincoln, Mazda, Volvo, Land Rover - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Tools & Jigs

Coolant Cap Wrench for Ford, Lincoln, Mazda, Volvo, Land Rover

0 downloads45 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

I made this for our 2014 Ford Escape's coolant reservoir cap. It can be a bit hard to turn and is tucked in a somewhat awkward spot and this tool helps a lot. It should fit many newer Ford models. I think it may also fit some Mazda, Volvo, Land Rover as I saw a tools for sale online that supposedly work on all these brands. I can only confirm it works on my Ford. If you find it works on other vehicles, let me know and I can add that information. It fits easily with just a little tolerance. I added a 3/8" square drive hole on the handle for a socket wrench just in case you need a little extra torque, which I doubt you will. If your cap is just under 60mm in diameter at the outside of the 6 ribs and is ~55 mm diameter at their base, then this should work for you.