Cowl Top Side Honda Civic (Part Number 74211SNAA00 ) - image

Files (1)

Cowl_Top_Screw_Cap_Cover.stl

STL

64.6 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

12g

Based on 25% main infill across listed model files

Material cost

$0.28

Filament only at roughly $24/kg PETG / ASA

Print time

20m–34m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Cowl_Top_Screw_Cap_Cover.stl	Cover / cap	64.6 KB STL	11g $0.26	12g $0.28	26g $0.62	Use PETG / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Trim Pieces

Cowl Top Side Honda Civic (Part Number 74211SNAA00 )

0 downloads107 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Honda Civic Cowl Top Screw Cap Cover Part Number - 74211SNAA00. Catalog note: Cowl Top Side Honda Civic (Part Number 74211SNAA00 ) is a 3D-printable car-part listing indexed for classified fitment Honda Civic. Provenance: source thingiverse.com, license CC BY. Use the linked source page for creator print settings, dimensions, and final fitment checks before printing.